The perfect technique for eliminating algae requires a multiport valve. A multiport valve permits water to be routed in a number of instructions, supplying you with completely different upkeep choices each time obligatory. On this case, you will have a “bypass” setting that diverts the water from the pool and sends it out of the backwash hose with out passing via the filter. To start, flip off your pump and set your valve to the “waste” or the “drain” setting.
Now flip the pump again on and begin vacuuming. When making an attempt to take away algae, it is necessary that your vacuum head strikes slowly alongside the underside of the pool. Be thorough in algae progress areas; you wish to make sure you get all of it. As chances are you’ll know, the water out of your pool might be pumped out rapidly, so attempt to act quick. Nonetheless, you may at all times purchase your self some extra time in case you flip in your water hose and refill your pool whereas doing this.
When you’re out of time, you’ll hear the skimmer start to cough a bit and suck in air. At this level, cease. If you have not completed the job but, flip off the pump, refill the pool, and repeat the method. You probably have eliminated all of the algae, then your job is full. Shut off the pump, set the valve again to “filter,” proceed to refill the pool, and comply with the aftercare steps talked about forward.